First steps

Usenet in
three steps.

Get access, set up a newsreader, off you go. The whole start takes less than ten minutes – and you need no prior knowledge.

The way into Usenet
1

Get access

One provider is enough – it connects you to Usenet. Three minutes, then your access details arrive by e-mail.

2

Setting up a newsreader

A free program that fetches the data. Server, port, username and you are done.

3

Discovering Usenet

An indexer helps you find what you are after. From there the newsreader does everything automatically.

Step 1

Finding the right Usenet provider

To get onto Usenet you need a Usenet provider. It connects you to the worldwide Usenet and determines how fast you can download, how far back content goes and how many connections you can use at once.

So when choosing, look at four things: unlimited speed, unlimited traffic, plenty of connections and high retention. The last one says how long content stays available on the servers.

With us you do not have to think about it for long. You get the full performance in every plan. No artificial throttling, no traffic cap and no cheap entry plan that suddenly gets more expensive later.

See all plans →
What matterswith us
Download speedUnlimitedonly your line sets the limit
Data volumeUnlimitedno download cap
connections100at the same time
Retention4,000+ daysover eleven years of archive
All figures apply in every plan.
Step 2

The newsreader: set it up once and it runs

A newsreader is the program that fetches, unpacks and reassembles the data for you. The good ones are free and open source – you pay nothing extra.

It is set up in two minutes: server address, port, username, password. The access details are in the e-mail you get after ordering.

Switch TLS/SSL on and use port 563 – then the connection is encrypted.
Set connections to 100. Fewer only slows you down, more is not possible.
If anything stays unclear, our support team will set it up with you.
Compare newsreaders →
Access detailsExample
Serverreader.easyusenet.nl
Port563TLS/SSL encrypted
connections100
Usernamefrom your e-mail
Passwordfrom your e-mail
Step 3

Get going: search, click, done

You do not search in the newsreader but through an indexer – a search site for Usenet. What you find there you download as a small NZB file.

You hand that file to the newsreader. It then knows which parts to fetch from which servers, downloads them in parallel across all connections and puts them back together at the end. All you see is a progress bar.

And because our archive reaches back over 4,000 days, you will also find articles posted more than eleven years ago.

See common questions →
Newsreaderrunning
218 MB/s
4.9 of 6.8 GB9 seconds left
100 connections active
Your line is the limit.We do not throttle – there is no ceiling here.
Choosing a provider

How to spot a good provider

Three things decide it – and on all three we are happy to be compared.

Performance

Our own platforms in Europe and the USA, redundantly connected. We do not throttle – your line is the only limit.

No limits

Unlimited traffic, 100 connections, over 4,000 days of retention – in every plan. No package with half the performance.

Honesty

The price stays, even after years. Cancel in one click, 14-day money back, no reason needed.

Ready for step 1?

Unlimited Usenet from €3.98 a month – full performance in every plan.

See all plans →
FAQ

Questions about getting started

What beginners write to us about most.

Do I need anything besides the access?
Just a newsreader – and that is free. SABnzbd and NZBGet are open source and run on Windows, macOS, Linux and most NAS devices. You do not need any extra subscriptions.
How long does setup really take?
Your access arrives by e-mail within seconds. The newsreader is set up in about two minutes: server, port, username, password. If you get stuck, our support team does it with you.
What is an NZB file?
A small signpost. It does not contain the data itself but the information on which parts it consists of and where they are. Your newsreader then fetches everything automatically and puts it together.
What does retention mean?
How long articles stay available on the servers. With us it is over 4,000 days – so more than eleven years. The longer the retention, the more you will find from further back.
How many connections do I need?
Set the newsreader to 100 – that is our maximum and it is included in every plan. Fewer only slows you down, more gains nothing.
Is my connection encrypted?
Yes, if you switch TLS/SSL on and use port 563. That is included in every plan at no extra cost. We are an EU company under European law.
Is a subscription or a block better to start with?
If you download regularly, the subscription is cheaper. If you want to see how often you use it first, take a block: pay once, no expiry date. Or start with the three-day test.
Get in touch →